- Menu
-
Brands
- Scuba Diving
-
Tech Diving
- Photo & Video
-
Snorkeling
-
Swimming
- Freedive & Spearfishing
- Outdoor
- New products
- Offers
- OUTLET
Cressi Plasma Pin Shaft 6.7mm
Cressi Plasma Pin Shaft 6.7mm
Description
Cressi Plasma Pin Shaft 6.7mm
Realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms.
Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.
SANDVIK steel hardened externally through an exclusive plasmatic vacuum process in high temperatures. This process makes the external part to have a hardness about 60 HRC without harming the resistance to the flexion of the rod.
Process of very strict control (rod by rod before to the mechanizing) to verify the perfect straightness of the rod.
Flap in stainless steel of wharf AISI 301 of 0,8 mm thickness. Mechanical resistance 1269 Nw/mm2 near to the one of the rod. Pin and orifice provided to the diameter of the rod between 2 and 2,5mm. Length in proportion to the rod; 55 mm in measures from 90 to 120 cm and 70 mm from 130 to 150 cm. Flap of two volumes, studied for the maximum hydrodynamics. Assembly with one light reducing of 1cm of length that integrates in the profile the rivets and improves notably the scope of the rod. The reducing does not suppose wastage of resistance since the pin of fin is provided according to the diameter of the rod. O-ring of enclosure of the flap included (red color).
Reinforced pins with curved radius of mechanization. Polyvalent design for metallic howitzers and of Dyneema. Material and adjustment system of high tenacity, which guarantees a resistance of 340 kg of tension.
Top format howitzer specially resistant and of great penetration.
Available diameters: Ø6,7 mm
Length Shaft Vs Speargun
- Shaft length 120cm for 75 cm speargun
- Shaft length 125cm for 84 cm speargun
- Shaft length 130cm for 85-90cm speargun
- Shaft length 135cm for 95-100cm speargun
- Shaft length 140cm for 105-110cm speargun