AOI UIS-P1 Ultra InTeLi Strobe

This compact innovative new strobe features a ring flash tube, COB light and supports both Sony TTL and OM System RC and manual exposure.

Specification

• Main Body Material PC + GF, Aluminum Alloy with Hard Anodization
• Depth Rating 100 meters

Strobe

• Energy: 150 W
• Beam Angle: 150 Degrees
• Color Temperature: 5,900K
• Flash Recycle Time: 1.8 sec (Full Power with 5,300mAh, 20A, Li-Ion Battery)
• Number of Flashes: 540
• Flash Sync Cord Fiber Optic
• Pre-flash Sync: ON / OFF Setting
• Flash Test Button: Yes
• Mounting: Ball Mount
• Dimensions: 205mm (L) x 91mm (W) x 133.5mm (H)
• Weight: On Land: Approx. 1,180 g (with Battery) / Underwater: Approx. 230 g (with 1 Battery)
• Flash Modes
  • RC/TTL Mode: OM System Cameras (RC FLASH, TTL AUTO, MANUAL, FP TTL AUTO, FP MANUAL)
  • Channel: CH 1, 2, 3, 4, Group A, B, C; Sony: TTL FLASH
  • i-Macro Mode: OM System Cameras (TTL AUTO, MANUAL); Sony: TTL FLASH
  • Manual Mode: 10 Steps Setting: 1/32+0.5, 1/16, 1/16+0.5, 1/8, 1/8+0.5, 1/4, 1/4+0.5, 1/2, 1/2+0.5 & 1/1

COB Light  

• Maximum Output 3000 Lumens
• Color Temperature 4500K
• Beam Angle 100 Degrees (Measured On Land with Standard Diffuser)
• Power Control Off, 100%, 50%, 25%
• Flash Auto Shut-off Yes
• Burn Time +/- 60 Minutes (Using COB Light Only, Max Brightness, and with 5,000 mAh Li-Ion Batteries)

Battery Requirements

• Battery Type 21700 Li-Ion Rechargeable Battery x 2 (Batteries Not Included in Product)
• Output Current Min. 15A
• Capacity Min. 5,000 mAh

Standard Accessories

• Standard Diffuser Strobe x 1; Diffuser Lanyard x 1
• Ball Mount x 1; Allen Key x 1
• Spare Battery Cap Seal-ring x 2; Control Knob Extension x 1
• O-Ring Remover x 1 (ORR-02); Silicone Grease x 1 (SIGR-2)
• Battery Storage Case x 1