Cressi King Black
KING is an advanced freediving computer designed, developed and produced 100% in Italy by Cressi. Its construction is fully modular and it is extremely robust and reliable, as it shares its hardware base with other models from the brand with a long track record in diving and freediving: Nepto, Cartesio, Neon and Goa. Cressi controls every aspect of quality, as it is entirely developed and made by Cressi Elettronica: software programming, construction and manufacturing, quality control and after-sales service.
Beneath its modern, attractive watch look lies sophisticated software with an elaborate freediving program, developed in close cooperation with the Cressi team, and an in-depth study of on-screen information layout for quick, intuitive access, given the many configurable parameters and the large volume of information it handles.
Construction
- Impact-resistant techno-polymer case, very light and highly resistant to knocks and cosmetic ageing. Extremely flat case (15.8 mm) with a very streamlined, edge-free profile that avoids snagging. Guaranteed to -120 m.
- Case diameter of just 48 mm with a large 35 mm UFDS (User Friendly Display System) screen. Information layout, screen contrast, digit size and proportions have been designed for easy reading. All data is segmented with subtle dividing lines that make it easy to read even under stress or in an emergency. Backlit display, activated by button or in case of alarm.
- Two well-integrated low-profile buttons with minimal clearances, ensuring the O-rings seal perfectly as they work at right angles and preventing particles or grains of sand from jamming them.
- The advanced design of its menus and two-button navigation system adds long-term reliability, with exemplary reading, data access and parameter changes. Setup, menu navigation and access to the large amount of information it provides are remarkably easy and always intuitive.
- New high-performance, low-consumption processor. It allows much faster data processing, stronger backlighting and alarm sound, and doubles battery life compared with previous models. ARM Cortex M3 32-bit CPU | 14 MHz frequency | 256 Kb flash memory | 32 Kb RAM.
- High-intensity backlit display, activated by button or in case of alarm (5 seconds per press).
- Optional interface with Bluetooth connection to PcLogbook. The interface connects to the dive computer via IR simply by resting the computer on it, and to the PC via USB cable. Software compatible with all versions of Windows and with Mac.
- Synthetic rubber strap with stainless steel buckle.
- Mineral glass screen highly resistant to breakage and scratches. Clear Bumpon protector available (one included as standard).
- Long battery life thanks to a combination of systems: power-saving mode when not in use with automatic switch-on, a low-consumption processor and a high-capacity CR2430 battery.
- Depth gauge calibrated in salt water for maximum accuracy in the most common use.
Navigation
Circular menu with two buttons:
- UP / SEL: a short press scrolls through the menus and increases setting values. Holding it enters the menus and confirms. Holding it in time, stopwatch or dive mode switches on the backlight.
- DOWN / ESC: a short press scrolls through the menus and decreases setting values. Holding it exits the menus. Holding it at the surface during activity ends the freediving session.
OFF mode
- OFF mode is useful in the pool as it disables the pressure sensor, for snorkelling, or whenever you do not want the computer to log your dives. It also extends battery life.
Free (Freediving) program
- DIVE: KING switches on automatically below -1.2 metres. In dive monitoring mode it shows: maximum depth of the current dive • instant speed • current depth • dive time • number of the current dive • water temperature • total session time (dive + surface) • maximum depth reached in the session • current time.
- SURFACE / POSTDIVE: back at the surface, KING enters SURFACE mode, with 5 pages showing: maximum depth of the previous dive • previous dive time • surface time in minutes and seconds • number of dives in the current session • current temperature • total session time (surface time + dive time) • maximum depth reached in the session • number of dives within the current session • minimum temperature reached in the session • ratio between dive time and surface time • current time. The data of the dives made during the session can be viewed on screen.
- CHRONO: records split times while the stopwatch is running. If you leave the CHRONO function with the stopwatch running, it keeps counting in the background.
- TIMER (COUNTDOWN): lets you set a countdown from 1" to 23 h 59' 59". If you leave the Timer function with the timer running, it keeps counting in the background.
- DUAL TIMER (DUAL-T): designed specifically for training, for example repetitive exercises with rest intervals. It consists of two timers (PHASE 1, PHASE 2) that run alternately, each adjustable from 00':01" to 59':59". The two timers can run up to 99 cycles, both progressively and regressively.
- DIVE SET: alarm setup: surface time warning (SURF-T), depth alarms (DEPTH AL1, AL2, AL3, AL4, AL5), dive time warning (DIVE-T) and depth interval alarm (STEP).
- LOGBOOK: stores up to 32 hours of profile at a 2-second sampling rate. Data shown: day, month and year • start time • total session time SESS (DIVE + SURF min) • maximum depth reached • page number being viewed P(1/2) • total number of dives in the session (D.) • minimum temperature recorded during the session • total session time spent at the surface (SURF-T) • total session time spent diving (DIVE-T) • depth time of the best dive of the session.
- SURFACE TIME ALARM (SURF-T): when this alarm is on and the preset time has elapsed, the computer beeps three times to warn that the surface time has been exceeded, and the surface time on the screen starts flashing. It can be set from 1'00" to 10'00" in 30" steps.
- DIVE HISTORY (INFO): the INFO screen shows system information: serial number Sn xxxxxx, firmware version xxx and the number of times the user has replaced the battery. Supplied from the factory with a battery replacement counter.
Additional functions
- TARAVANA MODE: for high-level freediving or spearfishing with very intense rhythms and/or great depths, KING lets you set up to 8 levels of protection against Taravana syndrome (decompression sickness in freediving). There are no official algorithms covering all the variables that can cause this kind of accident, so it depends on the athlete's own experience and an assessment of the day's conditions and of residual nitrogen built up on previous days, which will suggest one interval level or another between dives, from 8 possible levels. The coefficient indicates the multiple of the previous dive that sets the recommended surface interval: L1 - 1: ≥2.0 L2 - 1: ≥2.4 L3 - 1: ≥2.8 L4 - 1: ≥3.2 L5 - 1: ≥3.6 L6 - 1: ≥4.0 L7 - 1: ≥4.5 L8 - 1: ≥5.0
- WARM-UP DIVES (BLOODSHIFT): useful when you want to dive very deep, to reduce the risk of pulmonary oedema. Many studies suggest that freedivers' haemoptysis originates in increased pressure in the pulmonary capillaries. A series of gradual dives, starting shallow, seems an excellent way to reduce its occurrence: first (BLOODSHIFT 1°) to -5 m, second to -10 m (33 ft), and the third to half the set target depth.
- LOGBOOK SAMPLING RATE (LOG.SAM): useful if you want to download the dive profile via an external USB/Bluetooth interface. LOG.SAM lets you choose the profile sampling time. A longer sampling time gives a less detailed graph but stores more sessions; a shorter one gives a more detailed graph but fewer sessions. It can be set to 2/1/0.5 seconds: up to 32 hours of dive time at 2 seconds, up to 16 hours at 1 second, and up to 8 hours at 0.5 seconds.
- TIDE LEVEL (TIDE): the TIDE screen shows the tide level with a 4-level wave icon: one wave for low tide, four waves for high tide. When the tide indicator is active, the icon also appears on the main screen, both at the surface and during the dive. It also shows whether the tide is rising or falling.
- HYDRATION REMINDER (HYD): reminds the freediver to drink. The alarm can be set from 1 to 4 hours in 30-minute steps.
General specifications
- New menu navigation and parameter entry system for maximum usability and intuitiveness. Setup, menu navigation and access to the large amount of information it provides are remarkably easy and always intuitive.
- 12/24-hour clock with calendar and seconds
- Automatic activation
- Precision stopwatch
- Alarm clock
- High-intensity backlight
- Recommended no-fly time display
- Low battery indicator
- User-selectable units: metric (metres and °C) or imperial (ft and °F)
- User-replaceable battery. Removing the two screws on the back cover easily releases the whole power system, which is attached to the cover itself. CR2450 battery (we recommend replacing the O-ring at every battery change; battery and O-ring kit available from all Cressi dealers).
- OFF mode for snorkelling/swimming and battery SAVING
- LOG BOOK storing 50 dives per mode or 40 hours
- Very long battery life thanks to a combination of systems: power-saving mode when not in use with automatic switch-on, and a new low-consumption processor. CR2450 battery.
- Interface connects to the dive computer simply by resting the computer on it, and to the PC via USB cable. Software compatible with all versions of Windows and with Mac. It also has a very complete LogBook with modern PC management software (Windows/Mac) to download your freediving days to your computer, view all your dive data in detail and analyse your dive graphs.
- Depth gauge calibrated in salt water for maximum accuracy in the most common use. Water salinity setting (WATR): lets you adjust the depth measurement to the water salinity. Choose Salt for seawater and Fresh for fresh water.