Tecline Pack Donut 22 DIR Harness SS Backplate

Tecline Donut 22 with SS backplate and DIR harness

Complete starting set. Perfect for twinset configuration.

Recommended for: recreational, technical, cave and wreck diving.

This configuration can be expanded and modified with other Tecline buoyancy control system accessories.

Set components:

• Tecline Donut 22 Classic
• Tecline 3mm Stainless Steel Backplate
• DIR harness with standard webbing
• Transport bag

Specification:

Tecline Donut 22 Classic

• Double layer wing with 22L capacity (50lb/216N) recommended for twinsets 2x10, 2x12 and 2x15 L.
• Oval, donut-type construction makes is easy to move the gas from one to another side of the wing.
• Extremely durable and soft outer shell is made of special, non-fading Cordura Heavy Duty 1000D Nylon, resistant to damage and tearing.
• Two rows of holes for mounting screws allow to choose the position of the wing in respect to a twinset.
• Reliable YKK zipper – allows an easy access to the inner bladder.
• The inner bladder is made of Nylon 840 with increased resistance to aging and mechanical damage.
• The wing is equipped with a high quality 40 cm corrugated hose and 55 cm LP inflation hose (Proflex braided hose).
• The inflator's elbow is reinforced with a wide tape loop.
• The wing is equipped with one, low-profile dump valve on the left side.
• Grommet holes in the bottom part help to quickly remove water from the space between the bladders.

3mm Stainless Steel Tecline Backplate

• Material: Stainless Steel 3mm
• Weight: around 2 kg
• Three rows of mounting holes allow to choose the position of backplate in respect to the wing and cylinders.

DIR Harness with standard webbing

• Webbing 50mm – standard stiffness
• 2 D-rings bent (45 degrees)
• 1 D-ring straight
• Crotch strap with 2 D-rings
• Stainless steel buckle
• Bungee for the inflator hose positioning
• Rubber bands for the accessories stowing (eg. backup lights)