MdTEK MDC2K modular Light 2000 lumen

Modular 2000 lumen spotlight that can be used with a canister or handheld type.

Technical Specifications:

• LED Type: Luminus
• Brightness: 2000 LM
• Beam angle: narrow 7°, wide 77°
• Mode: High (2000 lm) 100%, Medium (1000 lm) 50%, Low (300 lm) 15%
• Battery: 3*18650 (38.85WH) & 6*18650 (77.7WH) & 12*18650 (155.4WH)
• Power-on time: 3*18650 power-on time: high brightness 120 min, medium brightness 240 min, low brightness 800 min - 6*18650 power-on time: high brightness 240 min, medium brightness 480 min, low brightness 1600 min - 12*18650 power on time: high brightness 480 min, medium brightness 9600 min, low brightness 3200 min
• Switch: magnetic button, long press the switch, short press to switch
• Material: Made of T6061 aircraft grade aluminum, it has excellent durability.
• Waterproof: IPX-8 waterproof standard, 150 meters
• To open or turn off, need to press the button for 2 seconds, the operation cycle of 2 seconds for switching, from high to low gear order.
  
  

Disclaimer:

• On/Off: To turn on or off, you need to press the button for 2 seconds. The button is activated and deactivated cyclically, from high to low gear command.
• Do not stare or look directly into other people's eyes. It can damage your eyes or cause temporary blindness.
• Avoid using the lamp in a cold and harsh environment for a long time, such as outdoors.
• On land, do not use it more than five minutes, as far as possible to prevent the lamp body and battery from overheating, which would cause a decrease in the life of the lamp, circuit and battery. , and failures.
• Do not open the battery in water, the resulting consequences will be borne by the user. In the event of failure, the warranty will be void.
• It should be stored in a clean, dust-free place. Open the battery compartment and prevent foreign bodies or water from entering the battery compartment. Prevent the sealing ring and silicone from coming into contact with dust and other foreign bodies.
• Battery maintenance: If the light is not used for a long time, the battery should be charged at least every two months.
• Sealing gasket: If the lamp is not used for a long time, you should check whether the seal position is correct before immersion in water, whether you see foreign bodies, whether the silicone is hard or whether the sealing gasket is around.
• Under normal use conditions, the sealing gasket should be changed with a new one every 1 year.
• Please take unused batteries and lamps to the appropriate collection point to help protect the environment and allow renewable resources to be used.